Iomega Security Camera 34338 User Manual

USER’S GUIDE  
TM  
®
Iomega StorCenter ix2 Network Storage (34338) and  
®
TRENDnet Wireless Day/Night Pan/Tilt Internet Camera  
Server with 2-Way Audio (TV-IP422W)  
During November 2008, TRENDnet and Iomega are offering great IP Camera capability with  
terrific storage capacity at a substantial discount if purchased together. As such, the purpose of  
this paper is to provide insight as to how to use these 2 wonderful products together.  
Iomega StorCenter ix2 server  
Overview  
TRENDnet IP Camera  
You’ll find that when you receive TRENDnet’s IP Camera and Iomega’s network storage products,  
individually they come with great features which will be useful on their own. For example, the IP  
Camera offered in this promotion doesn’t need an Ethernet cable connection to transmit a secure  
encrypted signal. This can all be done via the wireless technology that comes with the camera.  
Further Iomega’s ix2 has the capability to stream multimedia content through an attached DMA  
(digital media adapter) to a television giving you the capability to play back music, video and photos  
through your network.  
Many homes and businesses find that the surveillance application of these 2 technologies is very  
useful and may be the primary reason for the purchase. As such, here are some simple steps to follow  
to use these 2 products together:  
Set-Up the Camera:  
1) Ensure that you have the basic system requirements for use of the camera:  
a. 10/100Mbps Ethernet  
b. Wireless router or access point  
c. CPU: 1GHz processor or above  
d. Memory: 256MB RAM or above / 512MB or above (Windows Vista)  
e. Windows 2000/XP/Vista  
f. VGA Resolution: 800x600 or above  
g. Web Browser: Internet Explorer (6.0 or higher)  
User’s Guide – Iomega StorCenter ix2 1TB Network Storage and TRENDnet Wireless Day/Night Pan/Tilt Internet Camera Server with  
2-way Audio  
Page 1  
 
Set-Up the Network Storage:  
1) Use the included network cable to connect the StorCenter device to a network hub or switch  
(i.e. wireless router) or use the included network cable to the StorCenter device directly to a  
computer.  
2) Connect the included power cord to the back of the StorCenter device and an Uninterruptible  
Power Supply (UPS). Note: never plug your StorCenter device directly into a wall socket or  
power strip. Unexpected loss of power may corrupt data or damage the StorCenter device  
operating system.  
3) Turn on the power to the StorCenter device using the power button on the rear panel of the  
product.  
4) Start your computer, wait for the operating system to load, then insert the CD that comes with  
the StorCenter device. Note that if the software doesn’t run automatically, double-click on the  
CD icon, then double click the “Setup” icon.  
5) Install the StorCenter Storage Manager software. Once the installation completes, the  
StorCenter Storage Manager software will launch automatically. Note: the StorCenter  
Manager will automatically scan your network when launched. If you receive a message from  
Windows Firewall alerting you of network activity, click the “Unblock” button. Also note that  
for best results, use a computer that is connected to the same router, hub or switch as the  
StorCenter device.  
6) Once the StorCenter Manager software has found the StorCenter device, log into the  
StorCenter device. If you are logging in for the first time, follow the “Device Setup Wizard”  
that will help you create an administrator account and configure the StorCenter device.  
Network Storage Installation Is Now Complete.  
please refer to the User’s Manual that comes with the device or at  
User’s Guide – Iomega StorCenter ix2 1TB Network Storage and TRENDnet Wireless Day/Night Pan/Tilt Internet Camera Server with  
2-way Audio  
Page 3  
 
Using TRENDnet IP Camera (IP-TV422W) AND Iomega Network Storage (34338) Together:  
To use the two devices together, first the user should create a share on the ix2 Network Storage to  
store images from the IP Camera. This is how that is done:  
1. Using the software supplied with Iomega’s StorCenter ix2 Network Storage device, from the  
Shared Folders tab, click Add (near the bottom of the page) or from the Home tab, click Add  
Shared Folders. The Add Shared Folder page opens.  
2. Type a name for the shared folder. All shared folders must have a name. Names cannot exceed  
32 characters.  
User’s Guide – Iomega StorCenter ix2 1TB Network Storage and TRENDnet Wireless Day/Night Pan/Tilt Internet Camera Server with  
2-way Audio  
Page 4  
 
3. Choose whether to enable security for this shared folder. If you uncheck Enable Security,  
everyone on the network is granted read/write access to the shared folder without having to  
enter credentials; you cannot limit or configure individual user access to this shared folder.  
Anyone with access to the network can open, copy, modify, add, or delete files within the  
shared folder.  
If you check Enable Security, the administrator can grant users either Read/Write or Read  
access to the Shared Folder, or deny access completely by setting access to None.  
4. Check Connect the new shared folder to this computer to automatically connect this shared  
folder upon creation. If you uncheck this option, this shared folder can be connected later by  
accessing the Home tab's Connect Shared Folder link.  
5. If you have:  
checked Enable Security, click Next to set access rights for the Shared Folder.  
Continue to set access rights in the next step.  
unchecked Enable Security, click Apply to create the Shared Folder. Skip to the last  
step, where a confirmation page displays.  
6. You can set access rights to either Read/Write, Read, or None for each user. Select the Allow  
unsecured read access checkbox to grant all users either Read/Write or Read access to the  
Shared Folder, though you cannot completely deny a user access to this Shared Folder with  
this setting.  
7. Click Apply to create the Shared Folder.  
User’s Guide – Iomega StorCenter ix2 1TB Network Storage and TRENDnet Wireless Day/Night Pan/Tilt Internet Camera Server with  
2-way Audio  
Page 5  
 
8. If the Shared Folder was created successfully, a confirmation page displays. Click OK to return  
to the Shared Folders page.  
Then configure the camera to record to the new share on the network storage device. To do this,  
follow these steps:  
1) Using the camera software provided by TRENDnet, click on “SETUP” and then “Event Server”  
and then “Network Storage” (screen shot below)  
User’s Guide – Iomega StorCenter ix2 1TB Network Storage and TRENDnet Wireless Day/Night Pan/Tilt Internet Camera Server with  
2-way Audio  
Page 6  
 
2) Enter the server address of your StorCenter. (IP address shown)  
3) Enter in the Share name. (“Trendnet” shown)  
4) Click the “Test” button to test the connection and click “Apply”. (creates a small text file)  
5) Next set up the Motion Detection configuration by selecting “Motion Detect”.  
6) Lastly, select “Event Config” and then “MotionDetect Trigger”, and select “Record to Network  
Storage” and “Enable”. (screenshot below)  
7) Under the Recording File Path box, click “Browse”  
8) Type in the address of the share (the new folder created on the network storage device).  
9) Note that on this page, there are 2 other configurable fields  
a. Each Recording File Size: This option allows you to select from 20 to 100 MB so that  
the video will be recorded as another file automatically when the recording file reaches  
the specified size limit.  
b. Reserved HDD space for each camera: This option allows you to set to reserve the  
storage space on the hard disk drive (or network storage device) for the recording of  
each camera. Before setting the reserve space on the hard disk drive, you can check  
the available storage space that is displayed in the HDD Free space field.  
c. Enable Recycle Recording: Click on the camera number to clear the files when the  
unreserved space of the hard disk drive is full.  
© 2008 Iomega Corporation. All rights reserved. Iomega, the stylized “i” logo and StorCenter are either registered trademarks or trademarks  
of Iomega Corporation in the United States and/or other countries. TRENDnet is a registered trademark of TRENDnet Corporation in the  
United States and/or other countries. TRENDnet and IOMEGA do not assume any responsibility or liability for the advice given and shall not  
be liable for any direct, indirect, special, incidental or consequential damages in connection with the use of this information. Always back up  
your data. For more information, including technical information updates, please visit http://www.trendnet.com or http://www.iomega.com  
User’s Guide – Iomega StorCenter ix2 1TB Network Storage and TRENDnet Wireless Day/Night Pan/Tilt Internet Camera Server with  
2-way Audio  
Page 7  
 

Indesit Washer 6083 User Manual
Indesit Washer IWCN 61051X9 User Manual
Intermate Network Card LX T 04 User Manual
Jabra Microphone GN405 User Manual
JVC Speaker System MX C55 User Manual
Kalorik Popcorn Poppers PCM 35546 User Manual
Kenwood DVD Recorder MD MT877W User Manual
Kingston Technology Network Router KAROO User Manual
Kompernass Electric Cookie Press KH 1191 User Manual
Kompernass Toaster KH 1204 User Manual