Ryobi Laser Level ELL1001 User Guide

OPERATOR’S MANUAL  
ASSEMbLy  
cOMPAcT LASER LEvEL wiTh  
PAcKiNG LiST  
UNPAcKiNG  
Thisproducthasbeenshippedcompletelyassembled.  
If any parts are damaged or missing, please call  
1-800-525-2579 for assistance.  
Laser Level  
Mounting Aid  
Operator’s Manual  
AiRgrip™  
AAA Batteries (2)  
ELL1001  
OPERATiON  
Yourlaserlevelhasbeenengineeredandmanufactured  
iNSTALLiNG bATTERiES  
to our high standards for dependability, ease of opera-  
tion,andoperatorsafety.Whenproperlycaredfor,itwill  
give you years of rugged, trouble-free performance.  
See Figure 2.  
ridged  
area  
Depress the ridged area on the bottom of the bat-  
tery cover and pull the cover off the laser level.  
wARNiNG: To reduce the risk of injury, the  
user must read and understand the operator’s  
manual before using this product.  
Install batteries according to polarity indicators  
(+ or –) inside the battery compartment.  
Place the lens cover back onto the laser level and  
secure.  
Thank you for your purchase.  
BaTTerieS  
BaTTery  
COver  
wARNiNG:  
SAvE ThiS MANUAL FOR FUTURE REFERENcE  
When turning on the laser level, always protect  
the eyes of yourself and those around you. Never  
point the laser beam at anyone’s face, including  
your own.  
SAFETy RULES  
do not place the laser level in a position that  
Fig. 2  
may cause anyone to stare into the laser beam  
intentionally or unintentionally. Serious eye injury  
could result.  
do not operate the laser level around children  
or allow children to operate the tool. Serious  
eye injury could result.  
Always turn the laser level off when not in use.  
Leaving the tool on increases the risk of someone  
inadvertently staring into the laser beam.  
do not operate the laser level in combustible  
areas such as in the presence of flammable  
liquids, gasses, or dust.  
Always ensure the laser beam is aimed at a  
surface without reflective properties. Shiny  
reflective materials are not suitable for laser use.  
handle the laser level with care. Treat it as you  
would any other optical device such as a camera  
or binoculars.  
Avoid exposing the laser level to shock,  
continuous vibration or extreme hot or cold  
temperatures. Damage to the tool and/or serious  
injury to the user could result.  
Save these instructions. Refer to them frequently  
and use them to instruct others who may use this  
laser level. If you loan someone this laser level,  
loan them these instructions also.  
wARNiNG!  
TURNiNG ON/OFF  
REAd ANd UNdERSTANd ALL iNSTRUc-  
TiONS. Failure to follow all instructions listed  
below, may result in electric shock, fire and/or  
serious personal injury.  
See Figure 3.  
On  
Theon/offswitchislocatedonthesideofthelaserlevel.  
PushingtheswitchdownwillturnthelaserlevelONand  
activate the vacuum pump; pushing the switch up will  
turn the unit OFF. Always wait for at least 5 seconds  
between stopping and restarting the laser level.  
cAUTiON:  
Use of controls or adjustments or performance of  
procedures other than those specified herein may  
result in hazardous radiation exposure.  
USiNG ThE AiRgrip vAcUUM  
OFF  
See Figures 3 - 4.  
The laser level’s vacuum grip technology allows attach-  
ment to most smooth surfaces.  
Place the laser level on the surface you want it  
secured to and push in slightly to seal.  
liFT TO releaSe  
SUCTiOn  
cAUTiON:  
The use of an optical instrument with this product  
will increase eye hazard.  
Continue to hold the laser level against the surface  
while turning on the laser.  
Fig. 3  
Release the laser level slowly when you hear a  
change in motor sound.  
ThelaserguideradiationusedinthislaserlevelisClass  
IIIawith<5mWand650nmwavelengths. Theselasers  
do not normally present an optical hazard although  
staring at the beam may cause flash blindness.  
POrOUS  
SUrFaCe  
NOTE: To release the vacuum seal, turn the laser  
level’s power off. For fast release, press the protrusion  
on the side of the unit opposite the power switch.  
Pulling the laser level off the wall without releasing the  
vacuum could damage the tool.  
Avoid direct eye exposure when using the laser  
and do not project the laser beam directly  
into the eyes of others. Serious eye injury could  
result.  
do not remove or deface any product labels.  
Removing product labels increases the risk of  
exposure to laser radiation.  
The laser will automatically shut off 15 minutes prior  
to battery failure, but the motor will remain on. Press  
the on/off switch to power down the unit and replace  
the batteries.  
mOUnTing aid  
OPERATiNG ThE LASER LEvEL  
See Figure 4.  
FEATURES  
Place the laser level in the area where you want  
the laser line projected.  
Fig. 4  
PROdUcT SPEciFicATiONS  
Rotate the unit so that the laser lens points in the  
direction in which you want the line projected.  
Recommended Use......................................................................................................................................Indoor  
Length of Laser Line..........................................................................................Up to 30 ft., Horizontal or Vertical  
Laser ............................................................................................................................. Class IIIa, <5mW, 650 nm  
Power Supply.................................................................................................................2 AAA, 1.5 Volt Batteries*  
Battery Life ...................................................2.5 Hours Continuous Use — included Alkaline Batteries (Vacuum)  
1 Hour Continuous Use — included Alkaline Batteries (Laser)  
Operating Temperature...................................................................................................................... 32˚F to 104˚F  
Dimensions............................................................................................................. 3-1/2 in. x 2-7/8 in. x 1-3/8 in.  
Accuracy ......................................................................................................................................± 1/2 in. at 20 ft.  
*Laser level performance is greatly enhanced when using premium-branded alkaline batteries.  
Position the mounting aid on the surface where  
When a vertical line or level horizontal line is  
desired, level the tool by centering the bubble  
inside the appropriate vial located on top of the  
laser head.  
you want to use the laser level. Secure with pins  
or tape (not provided).  
Place the laser level against the mounting aid and  
push in slightly to engage the seal.  
Turn on the laser.  
Continue to hold the laser level against the surface  
while turning the unit ON and unit is adhered to  
surface.  
USiNG ThE MOUNTiNG Aid  
See Figure 4.  
Release the laser level slowly when you hear a  
change in motor sound.  
Using the mounting aid, you can use the laser level’s  
AIRgripfeaturetopositiontheunitonmanynon-smooth  
surfaces,includingbrick,paintedcinderblock,textured  
wallpaper, and stucco walls.  
KNOw yOUR LASER LEvEL  
laSer  
cAUTiON:  
Use of controls or adjustments or performance of  
procedures other than those specified herein may  
result in hazardous radiation exposure.  
See Figure 1.  
levelS  
lenS  
NOTE: TheAIRgripfeaturecannotbeusedwithstucco  
or unpainted cinderblock.  
The safe use of this product requires an understanding  
of the information on the tool and in this operator’s  
manual as well as a knowledge of the project you  
are attempting. Before use of this product, familiarize  
yourself with all operating features and safety rules.  
AiRgripvAcUUM TEchNOLOGy  
Your laser level uses a vacuum base that can adhere to  
smoothsurfaces. Usingthevacuumsealpreventswall  
damage caused by nails, pins, or adhesive tape.  
MAiNTENANcE  
To clean the laser lens, if needed, use ONLy a  
wARNiNG:  
soft cloth or cotton swab moistened with glass  
cleaner.  
To avoid serious personal injury, always remove the  
batteries from the tool when cleaning or perform-  
ing any maintenance.  
MOUNTiNG Aid  
The AIRgrip vacuum may be ineffective on some sur-  
faces. Use the mounting aid to increase the number of  
surfaces on which the AIRgrip vacuum can be used.  
Check the batteries regularly to avoid deterioration.  
Remove the batteries from the laser level if it is not  
going to be used for an extended time.  
GENERAL MAiNTENANcE  
mOUnTing  
aid  
Do not disassemble the laser level. This could  
cause exposure to hazardous laser radiation.  
Before initial use, wipe AIRgrip vacuum base with  
a damp cloth to remove any residue.  
Do not attempt to change any part of the laser  
lens.  
Store the laser level indoors.  
Keep the laser level free of dust and liquids. Use  
a damp cloth and mild soap to clean the outside  
casing. Avoid using solvents when cleaning plastic  
parts. Most plastics are susceptible to damage  
from various types of commercial solvents and  
may be damaged by their use.  
SERvicE  
This laser level has no serviceable parts. If the unit  
fails due to normal wear and tear within two years of  
purchase,returnwithoriginalreceiptforareplacement  
unit at no charge.  
Fig. 1  
wARNiNG:  
Do not at any time let brake fluids, gas-  
oline, petroleum-based products, pen-  
etrating oils, etc., come in contact with  
plastic parts. Chemicals can damage, weaken, or  
destroy plastic, which may result in serious per-  
sonal injury.  
ONE wORLd TEchNOLOGiES, iNc.  
1428 Pearman Dairy Road, Anderson, SC 29625  
ALWAYS BE AWARE of the location where  
the laser light is emitted when using the  
level. ALWAYS MAKE SURE that any  
bystanders in the vicinity of use are made  
aware of the dangers of looking directly  
into the laser beam.  
Phone 1-800-525-2579  
Please visit our website at www.ryobitools.com to register this product.  
Model No. ELL1001  
Ryobi® is a registered trademark of Ryobi Limited used under license.  
983000-972  
7-26-07 (REV:03)  
 

Ricoh Printer MP 1600 MP 2000 User Guide
Salem Baking Company Kitchen Grill 252801 User Guide
Samsung Blu ray Player BD P1620 User Guide
Samsung Cell Phone GH68 05247A User Guide
Samsung Dishwasher DW7933LRABB User Guide
Sanyo Projector PLV Z4 User Guide
Schumacher Battery Charger SF 200 30 User Guide
Sega Games G 80 User Guide
Seidio GPS Receiver RBT 1000 User Guide
Sennheiser Headphones CXL 400 User Guide