ELECTRIC STEAM
TILTING KETTLE
MODEL
KELT-20
KELT-30
KELT-40
KELT-60
KELT-80
KELT-100
CAPACITY
76 Liter
20 Gallon
30 Gallon
40 Gallon
60 Gallon
80 Gallon
100 Gallon
114 Liter
152 Liter
227 Liter
303 Liter
379 Liter
OPERATION SHALL BE BY:
Electrically, self-generating closed steam system operating at 50 psi
equipped for operation on:
❑ 208 VAC, 3 Phase, 50/60 Hz
❑ 208 VAC, 1 Phase, 50/60 Hz*
❑ 240 VAC, 3 Phase, 50/60 Hz
❑ 240 VAC, 1 Phase, 50/60 Hz*
OPTIONAL ITEMS AT EXTRA COST:
❑ Type 316 stainless steel liner for high acid content products
❑ 1-1/2" (38 mm) draw off valve
❑ 2" (50 mm) draw off valve
*Kettle shown with
Optional Spring Assist Cover
❑ 3" (76 mm) draw off valve
❑ 2" (50 mm) dairy valve
❑ 3" (76 mm) dairy valve
❑ 24 kw on 40, 60, 80 gallon
❑ 33 kw on 60, 80, 100 gallon
❑ 220 VAC, 1 Phase, 50/60 Hz*
❑ 220 VAC, 3 Phase, 50/60 Hz
❑ 380 VAC, 3 Phase, 50/60 Hz
❑ 415 VAC, 3 Phase, 50/60 Hz
❑ 480 VAC, 3 Phase, 50/60 Hz
❑ 220/380 VAC, 3 Phase, 4 wire
❑ 240/415 VAC, 3 Phase, 4 wire
❑ One piece lift off stainless steel cover
❑ Spring assist hinged stainless steel cover
❑ Etched gallon markings
SPECIFICATIONS:
Shall be a Model__________________________________ ,
self-generating, electric tilting kettle.Adouble wall kettle interior
shall form a steam jacket around the lower 2/3 of the kettle.
The jacket enclosure shall contain distilled water which is factory
sealed. The bottom of the kettle shall be of hemispherical design
for superior heat circulation.
The console shall be drip proof, stainless steel clad and shall
be supported on all welded, 1-5/8" (41mm) diameter stainless
steel frame and legs fitted with 4 hole adjustable flanged feet
for securing to floor.
❑ Etched litre markings
The kettle shall pivot on trunnions connected to the tilt
mechanism and the outbore bearing connected to the frame
and shall permit the kettle to tilt forward a full 90 for complete
emptying. The tilt mechanism shall be self locking for positive
stop action.
❑ Correctional package
*20 and 30 gallon only
ACCESSORIES:
ˆ Triple basket assembly
Construction shall be all welded #4 finish stainless steel, type
304. The controls shall be integrally mounted and shall include
a power switch, thermostat, pilot light, low water light, vacuum/
pressure gauge, safety relief valve, and low water shut off.
ˆ Perforated strainer for draw off
ˆ Solid stainless steel disc for draw off valve
ˆ Graduated measuring stick
ˆ
Strainer hook
ˆ Double pantry faucet with swing spout
ˆ Single pantry faucet with swing spout
ˆ Pan support
The kettle shall be standard with removable elements.
The kettle shall operate in a temperature range of 100°F to
290°F (38°C to 144°C) at a maximum pressure of 50 psi
(345kPa).
ˆ Pour strainer
ˆ Calibrated thermostat dial “C”
ˆ Calibrated thermostat dial “F”
Printed in USA
Form KELT Rev 0 (01/07)
|
Sharp MP3 Docking Station XL HF200PHBK User Manual
Shure Microphone PG52 User Manual
Smooth Fitness Elliptical Trainer Smooth Agile Trainer User Manual
Sony Camera Accessories ACC CFR User Manual
Sony Headphones MDR EX37B BLK User Manual
Sony MP3 Player WM FX251 User Manual
Sony Projector LMP H700 User Manual
Southern Telecom MP3 Player SMP558 4 User Manual
Speco Technologies Speaker SP 525C User Manual
Swann Home Security System SW216 2DS User Manual